BNC BS 带定位锁 注塑 装配 两用。
Material:1.MATERIAL
1.1 INSULAOR: ABS.
1.2 BODY:ZINC.
1.3 PIN:BRASS.
1.4 NUT:ZINC/BRASS.
1.5 WASHER:SPCC/BRASS.
1.6 SOLDERING LUG: SPCC/BRASS.
2 、FINISH
2.1 PIN :SEE TABLE.
2.2 BODY:SEE TABLE.
2.3 NUT&WASHER&SOLDERING LUG:MIN 80u" NICKEL PLATED.
3.ELECTRICAL CHARACTERISTICS
3.1 WORKING VOLTAGE: AC 500V.
3.2 WITHSTAND VOLTAGE:1 OOOV,50Hz,rms. 3.3 INSULATION RESISTANCE:1000M OHM MIN.
3.4 IMPEDENCE: 50 OHM.
4.ENVIRONMENTAL
4.1 WORKING TEMPERATURE:-55°C~+155°c.
4.2 RELATIVE HUMIDITY:MAX 95%(40°c土2°C）
|
BNC-101
Description
Connectors for consumer electronics